Backed by our manufacturer’s 20 year structural guarantee – details available on request.
The base of this bunded store is manufactured from 3mm mild steel sheet with RHS cross members and pressed ribs. The corner posts, shelf frames and main rails are all made from rolled hollow section. The back, sides and door are pressed from 2mm mild steel sheet (corrugated as required for additional strength) while the roof is pressed with suitable bracing and fully welded around the perimeter. One end of the bunded store is fitted with lockable, sliding doors giving access to a shelved area which can hold up to four pallets of 205 litre drums.
The walk-in compartment can be accessed through the hinged door on the side of the unit and has shelving for small containers. This area is fitted with high and low level louvre vents and the internal divide between the walk-in area and the shelved pallet store consists of an open framework. As a chargeable option we can ‘wall’ this area to completely separate the two compartments, using either a single skin or a fire rated double insulated divider. The entire bunded store is protected by a fully seam welded sump covered by a galvanized grid mesh in the walk-in area and galvanised support channels in the drum storage area. The full width base plinths eliminate ground contact, the sloping roof has crane-lifting points and the unit is shot blasted before being painted.
NOTE: The “floor” area above the sump in the drum store area is covered with galvanised steel channel sections so that loose drums or pallets can be stored directly on to it, while the upper shelf is an open, box section construction designed to support pallets. Grid mesh shelving is available for the upper shelf as a chargeable option for those who wish to have it fitted with a full “floor”. Please contact us for further information.